12 Camfire DCi User's Guide
Reactivating the Camfire DCi System
After an extended period of inactivity, the Camfire DCi system automatically goes into sleep
mode. You can also put the system into this mode by pressing the Sleep button.
In sleep mode, the control unit screen is blank. To reactivate the system, press any button. If
you assigned a control unit password, you’ll also need to enter it as explained in the next
procedure.
To enter a control unit password
If you assigned a control unit password, the following screen appears whenever the control
unit is reactivated.
1. Use the scroll button to move up or down to select each character.
2. Scroll right to advance one space. The maximum number of characters allowed is 16.
To delete the previous character, scroll left.
3. When you finish entering the password, press OK.