Maintenance
To change batteries:
1Place your FlashPath on a flat surface and gently press down on the battery cover.
2Turn each cover
3Install new lithium button cells. Make sure that the positive side (marked with a + sign) is up and that the side spring contact is located on the side of the battery. The contact must not be trapped beneath the battery.
Caution: Never insert Flashpath into a floppy drive without batteries in place and the covers properly closed.
Cleaning
Remove the FlashPath from the floppy disk drive; remove the Secure Digital Memory Card or MultiMediaCard from the FlashPath. Use a clean, dry, lint free cloth or cotton swab to wipe off any oil, dust, or particles in the slot on the front and the back of the FlashPath.
If necessary, clean the remainder of the outside of the FlashPath with a clean, lint free cloth or paper towel and denatured alcohol. After cleaning, place FlashPath in its jewel case for storage.
Uninstalling FlashPath Software
To uninstall FlashPath software:
1Click on Start > Settings > Control Panel.
2Select Add/Remove Programs. The Add/Remove Programs Properties window opens.
FlashPath User Guide
•
•
• 13
•
•
•
