CONFIGURING THE ADSL ROUTER
Parameter Setting
Select your Country and Internet Service Provider. This will automatically configure the ADSL Router with the correct Protocol, Encapsulation and VPI/VCI settings for your ISP.
If your Country or Internet Service Provider is not listed you will need to manually enter settings. Go to “Parameter Setting - Country or ISP Not Listed” on page
If your ISP uses PPPoA or PPPoE, then you will need to enter the username, password and DNS Server address supplied by your ISP.
If your ISP uses 1483 Routing, then you will need to enter the IP address, Subnet Mask, Default Gateway and DNS Server address supplied by your ISP.
Note: By default 192.168.2.1 is set for the DNS Server address, this needs to be changed to reflect your ISP’s DNS Server address.
Click “NEXT” to continue.
