Chapter 3: Driver Installation
The Driver and Documentation CD that accompanies the TigerCard™ 10G contains all the operating system drivers supported by this card. See the “RELEASE.TXT” file on the CD for a list of all drivers. Refer to this guide for instructions on installing drivers.
Any new or updated drivers can be downloaded from SMC’s Web site, http://www.smc.com/.
Note: The install procedures in this guide show how to install the
Windows Driver Installation
Download the following package from the SMC support site:
This package contains a Microsoft Windows® Installer (MSI) Setup Wizard for the Windows drivers.
You will need local administrative privileges on the target machine in order to install the SMC network drivers. If you do not have administrative privileges on the target machine, contact your system administrator for assistance.
Driver installation can be performed before or after installing the TigerCard™ 10G into the target machine. However, SMC recommends users install the TigerCard™ 10G into the target machine before installing the SMC drivers. The SMC Setup Wizard can install drivers automatically without requiring you to manually follow the steps of the “Found New Hardware Wizard.”
1.On the first boot after installing the TigerCard™ 10G into the target machine, Windows may prompt you with the “Found New Hardware” dialog. Click "Cancel."
If the “Found New Hardware” dialog appears later during the installation process, it can be safely ignored.
