7004VBR – Manual
CHAPTER 2 Getting to Know the Barricade
The SMC7004VBR Barricade Cable/DSL Broadband Router is the perfect solution for the home/office environment. This
∙4 - 10/100 Mbps
∙1 - 10/100 Mbps WAN port with
∙Comprehensive LEDs for network status and troubleshooting
∙Reset Button
2.1 LED Indicators
The Barricade includes LED indicators on the front panel that simplify installation and network troubleshooting.
LED | ON | OFF | FLASHING |
POWER | Receiving power | Not receiving power | N/A |
WAN | Good WAN connection | No WAN connection | Transmitting or receiving |
| detected | detected | traffic |
LINK/ACT | Good LAN connection | No LAN connection | Transmitting or receiving |
| detected | detected | traffic |
10/100 Mbps | LAN port operating at | LAN port operating at 10 | N/A |
| 100 Mbps | Mbps |
|
Resetting the Barricade
The Reset button is located on the rear panel of the Barricade Broadband Router. Use a paper clip or a pencil tip to push the Reset button.
Reset
If the Router is having problems connecting to the Internet, simply unplug the router for 3 seconds then plug back in.
Restore Factory Defaults
If resetting the router does not resolve your issue, then you can follow these steps:
1.Leave power plugged into the router
2.Locate the reset button on the back panel, press and hold until WAN LED flashes off.
3.Release reset button.
5
