SMC Networks SMC8126PL2-F Renumbering the System

Basic Configuration
3-33
3
CLI – Enter the IP address of at least one SMTP server, set the syslog severity level
to trigger an email message, and specify the switch (source) and up to five recipient
(destination) email addresses. Enable SMTP with the logging sendmail command
to complete the configuration. Use the show logging sendmail command to display
the current SMTP configuration.
Renumbering the System
Web – Click System, Renumber. Click the Renumber button to renumber the switch.
When prompted, confirm that you want to renumber the switch.
Figure 3-20 Renumbering the System
Console(config)#logging sendmail host 192.168.1.4 4-47
Console(config)#logging sendmail level 3 4-48
Console(config)#logging sendmail source-email
big-wheels@matel.com 4-49
Console(config)#logging sendmail destination-email
chris@matel.com 4-49
Console(config)#logging sendmail 4-50
Console(config)#exit
Console#show logging sendmail 4-50
SMTP servers
-----------------------------------------------
1. 192.168.1.4
SMTP minimum severity level: 4
SMTP destination email addresses
-----------------------------------------------
1. chris@matel.com
SMTP source email address: big-wheels@matel.com
SMTP status: Enabled
Console#