SMC Networks Wireless Broadband Router manual

5.Select the Microsoft item in the manufacturers list. Choose TCP/IP in the Network Protocols. Click OK button to return to Network window.

6.The TCP/IP protocol will be listed in the Network window. Click OK to complete the install procedure and restart your PC to enable the TCP/IP protocol.

A.2 Set TCP/IP Protocol for Working with IP Sharer

1.Click Start button and choose Settings, then click Control Panel.

-34-

Image 35

SMC Networks Wireless Broadband Router specifications Set TCP/IP Protocol for Working with IP Sharer

Contents

User Guide Page CE Declaration of Conformity TrademarksFCC Interference Statement Table of Contents Page Introduction Functions and Features Packing List Port Hardware InstallationPanel Layout Front PanelPage Function Color Status Description Or upgraded. Don’t turn it off Port Description Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Rear Panel Set up WAN connection your cable/xDSL modem connection Set up LAN connection Power on Make Correct Network Settings of Your Computer Network Settings and Software Installation Request timed out Install the Software into Your ComputersPage Page Startup and Login Configuring Wireless Broadband Router Status Toolbox Primary Setup Dial-up Network Static IP AddressDynamic IP Address PPP over Ethernet Dhcp Server Virtual Server Special AP Access Control Misc. Items Wireless Setting Print Server Configuring on Windows 95/98 PlatformsPage Configuring on Windows NT Platforms Configuring on Windows 2000 Platforms Configuring on Unix-based Platforms Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98 Set TCP/IP Protocol for Working with IP Sharer Page Page Do not input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page