Smeg 129316 manual Installation and connection, Removing wrapping, Selecting, Appropriate location

Installation and connection

Removing wrapping	• Packaging materials are environmentally friendly:
		they can either be recycled, safely disposed of or
		destroyed without any threat to the environment.
	• To be able to do this effectively all materials are
		marked accordingly.
		Be careful not to damage cabinet of the
		appliance with a sharp object when
		removing the packaging.
		Before connecting the appliance, let it
		warm up to room temperature (wait for two
		hours).
	Ventilation slots and openings on the appliance
Selecting the
appropriate location of	front and rear wall should not be obstructed.
the appliance		A - Evacuation dryer
	• Place the appliance in a well ventilated room with
		a window or a built-in fan.
	• Connect the evacuation tube to the pre-prepared
		opening.
	• Evacuation must not be connected to air duct
		used as a chimney for exhaust gasses of
		appliances using other combustion material.

B - Condensation dryer

•Do not place the appliance in a room where there is danger of freezing.

•Location should be adequately ventilated. Room temperature should always be between 0°C and 25°C since frozen water in the condensation container or in the pump may damage the dryer.

129316

6