Fault:

Cause/Remedy

 

 

 

Bulb replacement:

Before replacing the light bulb, disconnect the

 

 

appliance form the power supply. Using the

 

 

screwdriver remove the cover, replace the bulb with

 

 

a new one (E 14, max. same voltage as the factory

 

 

one) and fit back the cover.

 

 

 

 

Please dispose of this correctly.

 

 

 

 

Light bulb is consumption material and is not

 

 

covered by the warranty!

 

 

 

Green LED is flashing:

If the green LED is flashing, call the nearest service

 

 

center.

 

 

 

Error code appears on the

If the character E1 appears on the digital display

display (certain models only):

 

call service assistance.

 

 

 

Troubleshooting helpful hints:

If you are not able to fix the trouble by any of

 

 

the above tips, turn the thermostat button to the

 

 

position ,disconnect the power cord from the

 

 

mains outlet, wait 10 minutes, and reconnect the

 

 

appliance.

 

 

Should none of the above guidelines be of positive

 

 

help, please call for service assistance, quoting

 

 

information given on the rating plate either within,

 

 

or at rear of an appliance.

 

 

 

142396

17

Page 17
Image 17
Smeg 142396 manual Fault Cause/Remedy