Smeg A1C Instructions for the installer, Installation Of The Appliance, Electrical connection

Models: A1C

1 25
Download 25 pages 12.69 Kb
Page 4
Image 4
Instructions for the installer

Instructions for the installer

2. INSTALLATION OF THE APPLIANCE

This unit is equipped with a type Y fire protection, and may be set against walls that are higher than the hob.

2.1 Electrical connection

Make sure that the power line voltage matches the specifications indicated on the rating plate located inside the storage compartment.

This rating plate must never be removed.

On the power line, install an omnipolar cut-off device with contact cut-off distance greater than or equal to 3 mm, located in an easily accessible position near the unit.

The appliance is fitted with a terminal board at the rear for electrical connections (see following diagram). To access, remove the rear cover.

31

Page 4
Image 4
Smeg A1C manual Instructions for the installer, Installation Of The Appliance, Electrical connection