Adjustment of minimum for natural gas | Smeg A21X-6 instruction

Instructions for the installer

4.1 Adjustment of minimum for natural gas

Light the burner and take it to the minimum . Remove the gas tap knob and turn the adjustment screw inside or at the side of the tap shaft (depending on the model) until there is a regular minimum flame. Replace the knob and check burner flame stability: (rapidly turning the knob from maximum to minimum position, the flame should not go out). Repeat the operation on all the gas taps.

4.2 Positioning and levelling of the appliance

Having carried out the electricity and gas hook-up, level the appliance using the four adjustable legs.

4.3Mounting the rear top upstand

•Position the upstand above the top, taking care to align holes A with holes B.

•Secure the upstand to the top by tightening screws C.

Page 11

Image 11

Smeg A21X-6 manual Adjustment of minimum for natural gas, Positioning and levelling of the appliance

Contents

Contents Instructions for Safe and Proper USE Introduction Introduction This rating plate must never be removed Installation of the ApplianceElectrical connection Gas connection Room ventilation Clearance above and around domestic cookers Requirements Instruction for wall fixing Adaptation to Different Types of GAS Replacement of nozzles on the hob Burners Burner and nozzle characteristics tableFinal Operations Arrangement of burners on cooking hob Mounting the rear top upstand Adjustment of minimum for natural gasPositioning and levelling of the appliance Front control panel Cooking HOB Burner Command KnobDescription of Controls Auxiliary Oven Function Switch Knob OvensThermostat Knob Ovens Main Oven List of Functions Setting the timeElectronic Analogue Clock Minute-minder Programming Demo Function Diameter of containers Practical advice for using the cooking hob burnersUSE of the Cooking HOB Lighting of the cooking hob burners Storage compartment USE of the OvensOven Light Cooling fan Available Accessories Traditional cooking main and auxiliary ovens Function Switch Thermostat Selector Switch from 50 to 250CCooking Hints Make sure that the oven door is closed during cooking Function Switch Thermostat Switch AT MaximumHot-air cooking main oven Grill cooking main and auxiliary ovens Delicate cooking auxiliary oven Function Switch Thermostat Switch from 50 to 200CHot-air grilling main oven Defrosting main oven Function Switch Thermostat Switch in Position Spit cooking auxiliary oven Cleaning of cooking hob components Cleaning and MaintenanceCleaning stainless steel Ignition plugs and thermocouples Cleaning of the ovenDo not USE a Steam JET for Cleaning the Inside of the Oven Burner caps, flame cap crowns and burners Looking after the self-cleaning liners Self-cleaning liners main ovenUsing the self-cleaning liners Door glass Assembling the self-cleaning liners Replacement of light bulbs Extraordinary Maintenance By a specialised technician Removing the doorOven door gaskets Lubrication of gas taps Cause What to do Problems and CausesPreventive maintenance Problem

Smeg A21X-6 Adjustment of minimum for natural gas, Positioning and levelling of the appliance

Models: A21X-6

Instructions for the installer

4.1 Adjustment of minimum for natural gas

4.2 Positioning and levelling of the appliance

4.3Mounting the rear top upstand