Smeg A42C-2, A42C-5 Positioning and levelling of the appliance, Instructions for the installer

Instructions for the installer

Complete wiring up to power supply with an appropriately rated five-core plug (see data plate) or, in case of operation from a 220-240V∼power supply, with a three-core plug. Make sure that plug and wall socket are of the same type and are in conformity with regulations in force. Make sure that the appliance is properly earthed. Before powering, check that the power line is properly earthed. Avoid using adapters or shunters.

The manufacturer declines all responsibility for damage to persons or things caused by non-observance of the above prescriptions or by interference with any part of the appliance.

2.2 Positioning and levelling of the appliance

Having carried out the electricity hook-up, level the appliance using the four adjustable legs.

2.3Instruction for wall fixing (only on some models)

1)Fix the screw to the wall and hook the chain (B);

2)Hook the chain to the hole positioned at the rear of the cooker by the gas pipe (A);

3)Once the chain is in position, push the cooker against the wall;

4)The height of the screw hole from floor level must not exceed 800 mm (C).

ABC

35