Smeg A42C-2 Instructions for the installer, Installation Of The Appliance, Electrical connection

Models: A42C-5 A42C-2

1 27
Download 27 pages 27.41 Kb
Page 4
Image 4
Instructions for the installer

Instructions for the installer

2. INSTALLATION OF THE APPLIANCE

This unit is equipped with a type Y fire protection, and may be set against walls that are higher than the hob.

Built-in appliance

Free-standing installation

2.1 Electrical connection

Check that the voltage and dimensioning of the supply line correspond to the characteristics shown on the plate fixed to the rear protective cover of the appliance.

This plate must never be removed.

On the power line, install an omnipolar cut-off device with contact cut-off distance greater than or equal to 3 mm, located in an easily accessible position near the unit.

33

Page 4
Image 4
Smeg A42C-2, A42C-5 manual Instructions for the installer, Installation Of The Appliance, Electrical connection