Belkin F1DZ104T, F1DZ102T user manual Installation, Specifications, Pre-Configuration

OVERVIEW

Specifications

Part No.: F1DZ102T, F1DZ104T

Power: 12V DC, 1A AC power adapter with center-pin positive polarity

Daisy-Chain:Maximum of 4 KVM switches

PCs Supported:

2(F1DZ102T)

4(F1DZ104T)

Keyboard Emulation: PS/2

Mouse Emulation: PS/2

Monitor Supported: VGA, SVGA, MultiSync, and LCD (optional adapter may be required)

Max. Resolution: 2048x1536@85Hz

Bandwidth: 400MHz

Keyboard Input: 6-pin miniDIN (PS/2)

Mouse Input: 6-pin miniDIN (PS/2)

VGA Port: 15-pin HDDB type

LED Indicators:

2(F1DZ102T)

4(F1DZ104T)

Enclosure: Metal enclosure with high-impact plastic faceplate

Dimensions:

(F1DZ102T) 11 x 1.75 x 6 in. (279 x 44.5 x 150mm)

(F1DZ104T) 11 x 1.75 x 6 in. (279 x 44.5 x 150mm)

Weight:

(F1DZ102T) 5.3 lbs. (2414.5g)

(F1DZ104T) 5.3 lbs. (2414.5g)

Operating Temp: 32° to 104° F (0° to 40° C)

Storage Temp: -4° to 140° F (-20° to 60° C)

Humidity: 0-80% RH, non-condensing

Warranty: 5 years

NOTE: Specifications are subject to change without notice.

INSTALLATION

Pre-Configuration

Where to Place the Switch

The enclosure of the OmniView SE Plus Series KVM Switch is designed for standalone or rack-mount configuration. An optional Rack-Mount Kit (F1D005) is available for use with the 4-Port KVM Switch.

Consider the following when deciding where to place the Switch:

•whether or not you intend to use the direct-access port selectors;

•the lengths of the cables attached to your keyboard, monitor, and mouse;

•the location of your CPUs in relation to your console; and

•the lengths of the cables you use to connect your computers to the Switch.

Cable Distance Requirements

For PS/2 computers: VGA signals are best retained when transmitted up to 25 feet. Beyond that length, the probability of video degradation increases. For this reason, we recommend that the length of the cables between the connected computers and the Switch does not exceed

25 feet.

Note: If you need your console to reside further than 25 feet from the Switch, we recommend using the Belkin CAT5 Extender (F1D084) with a standard CAT5 UPT cable. By using this device, you may increase the distance between your Switch and your PS/2 keyboard, PS/2 mouse, and monitor by as much as 500 feet without risking signal degradation.

For USB computers: USB signals are the strongest when transmitted up to 15 feet between the Switch and the CPU. Beyond 15 feet, the probability of signal degradation is likely, and this may cause the device to fail.

Cautions and Warnings

Avoid placing cables near fluorescent lights, air conditioning equipment, or machines that create electrical noise (e.g., vacuum cleaners).

8 9