OVERVIEW
OmniView SE Plus Series KVM Switches allow you to control up to a maximum of 16 computers with one keyboard, monitor, and mouse. They support PS/2 input devices (keyboard and mouse) as well as VGA, SVGA, XGA, and XGA-2 video.
It supports both PS/2 and USB output. This enables cross-platform control over PCs and USB-based computers including USB Sun™ workstations and Mac® computers.
Feature Overview
Enhanced Security
Directly routes input and output signals to each individual computer, preventing unintended information exchange.
Hot Keys
Hot key functionality allows you to select a desired port using designated key commands. By using a simple hot key sequence on your keyboard, selecting one computer from as many as 16 computers is instantaneous. For a listing of complete hot key instructions and commands, see page 18.
AutoScan
The AutoScan feature allows you to set your Switch to scan and monitor the activities of all operating computers connected to the Switch—one by one. The time interval allotted for each computer is 10 seconds. For complete instructions on AutoScan usage, please refer to page 20.
Video Resolution
Through a 400MHz bandwidth, the Switch supports video resolutions of up to 2048x1536@85Hz. To preserve signal integrity at these higher resolutions, your Switch requires 75-Ohm coaxial VGA cabling.
Flash Upgrade
Flash-upgradeable firmware allows you to obtain the latest firmware upgrades for your Switch. This enables your Switch to maintain consistent compatibility with the latest devices and computers. Firmware upgrades are free for the life of your Switch. Refer to the flash upgrade instructions on page 20 or visit us at belkin.com for complete upgrade information and support.
OVERVIEW
Direct-Access Port Selectors
Direct-access port selectors, located conveniently on the front face of the Switch, allow for simple, manual port-selection. Each button controls a port. The BANK scroll buttons located on the front panel of the Switch let you select daisy-chained switches. Each scroll button corresponds to a daisy-chained switch. You can add more ports to your KVM configuration by connecting SE Plus Series KVM Switches, up to a maximum total of four switches to support as many as 16 computers.
LED Display
An LED display on the face of the Switch serves as a status monitor. An LED next to each direct-access port selector lights to indicate that the console currently controls the corresponding computer. As a port selector is pushed, the LED next to it will light up. A flashing port LED indicates that there is no computer connected to that port.
7-Segment LED Display
When daisy-chaining multiple KVM Switches together, the 7-segment LED display serves as a quick indicator of the selected BANK.
