Instructions for the User
4.USING THE OVEN
4.1Precautions and General Advice
When the oven is used for the first time, it should be heated to the maximum temperature for long enough to burn off any oily residues left by the manufacturing process.
If you have to carry out any procedures on foods, leave the door open for as short a time as possible to ensure the temperautre inside the oven does not drop far enough to impair cooking results.
4.2Setting the time
At first use, or after a power failure, the current time must be set. The
display will show the flashing numbers 
.
To set the current time, hold down START + STOP together until the display stops flashing.
Now press or hold down START to increment the hour display. Once the current hour has been set, press STOP to set the minutes and increment them as before by pressing the START button.
When the correct time is set, press the STOP button and the display will stop flashing.
4.3Power setting
After having set the time as described above and pressed the STOP button to confirm the setting, the display will show P8.3 (maximum power absorption 8.3 kW) if the oven is connected to a
Press START repeatedly to scroll thorugh the power absorption settings available:
P8.3, P5.5 or P3.0 for three-phase power connection;
P5.5 or P3.0 for
After selecting the appropriate power, press STOP to confirm the setting. N.B. This power setting operation only has to be carried out the first time the oven is connected. The value set is saved and automatically used whenever the oven is switched on after this. To modify this setting or the time, press START + STOP together to return to the point described in section “4.2 Setting the time”
24
