Instructions for the installer
The power supply connector on the back of the oven may be used only for supplying the optional extractor hood, which has maximum power absorption of 300W.
2.1.1 Safety thermostat
The oven is fitted with a safety device which trips in case of serious malfunction. To reset, contact the nearest servicing centre.
The manufacturer declines all responsibility for damage to persons or things caused by
2.2 Levelling
Adjust the four feet so as to set the oven on a perfectly level plane. For this purpose, loosen the lock nut and unscrew the foot. The range of adjustment of the screw is 10 mm.
2.3Water line connection
Connect the water intake valve on the back to the water supply using a hose with a ¾ gas thread, making sure that the connections are secured tightly.
If the water hose is new or has not been used for a long period of time, run the water to ensure that the water is clear and free of impurities before you connect it. This is a precautionary measure serving to avoid the risk of the water causing blockage and thus damaging the appliance.
You are advised to supply the oven with a water pressure ranging between a minimum of 50 KPa and a maximum of 500 KPa.
An exhaust pipe is fitted on the top of the oven to allow the discharge of steam during cooking. Make sure that it's no way obstructed.
21
