Instructions for the installer
WARNING: if the phase voltage drops below 190 VAC, the performance of the oven may suffer, not due to the product itself.
The power socket located in the rear part of the oven must be used only to supply the extraction hood. The hood is provided as an optional accessory and has a maximum absorbed power of 300W.
The terminal marked with this symbol connects parts together that are normally at zero potential. Connect the appliances appropriately using this terminal in order to make sure that they are equipotential.
2.1.1 How to reach the terminal board
1Unscrew the fixing screws at the back of the side casing.
2Slide the side casing as shown in the figure.
26
