Smeg ALFA41VEK Instructions for the User, How programmed preheating works, Manual mode cooking

Instructions for the User

Press START to increment the minutes.

Press STOP to move on to displaying the next parameter. The display shows UPrh.

Press START to display the preheating temperature.

Press START or keep it pressed to increase the preheating temperature (from 30° to 250°).

(N.B. - We recommend setting the temperature slightly higher than the cooking program temperature itself, so that the preheating phase of the selected program will last for the shortest possible time since the oven will automatically recognise the preheating temperature and indicate that it is ready for use for cooking as soon as possible).

Press STOP to move on to displaying the next parameter.

The display shows a flashing OFF message (program switch-off time setting).

Press START or keep it pressed to increment the hours. Press STOP to move on to setting the minutes.

Press START per increment the minutes. Press STOP to complete the editing operation. The display shows UEnd.

The parameters set are now saved in the chosen program.

4.10 How "programmed preheating" works

If the above parameters are set correctly, and only if the knob is set on P9, the oven will run the preheating program every day at the set time; during the preheating the display will show the "PrEh" message, and once the set temperature is reached it will be kept constant until the switch-off (OFF) time set, or until the user interrupts it by pressing the STOP button.

After STOP has been pressed, the oven is ready to run any cooking program.

4.11 Manual mode cooking

Use the knob to select the "easy” program (P10 *).

The special feature of this user-editable program is that the cooking parameters set are not retained in the memory when the knob is turned to any other position.

This means that an "empty" program is always immediately available for quick, easy editing.

32