Instructions for the User
4.4Fan mode cooking
Use the knob to select one of the preset programs (P1 - P5).
The display shows the parameters of the selected program (tc = cooking time; temperature in degrees Centigrade and program number, e.g. P1). Press START to confirm the start of the program.
The program starts, performing the preheating stage; the display shows "PrEh".
When the preheating is complete, a "BEEP" sounds to indicate that cooking can start.
Press START to start cooking.
(If START is not pressed after the beep, the temperature is held constant for about 10 minutes, after which it will start to drop for a period up to a maximum time of 20 minutes, counted from when the beep sounded. After this the oven switches off. During this stage, the display shows the parameters of the selected program).
N.B. – although this is not recommended in terms of cooking quality, the program can be started even before the preheating temperature is reached by pressing START.
During cooking, the display shows the time left until the end of the cooking process and the temperature set. During the last minute of cooking, the display will only show the countdown from 60 to zero seconds (end of cooking time). When all the cooking time has passed, a BEEP will sound for 20 seconds and the display will show "End".
During these 20 seconds the user can extend the cooking time as required, in manual mode, as follows. Press START; the display will show "tp00". From now on, each pressure on the START key corresponds to one more minute's cooking; up to 10 extra minutes are permitted. Cooking will restart at the programmed temperature after 5 seconds.
After these additional minutes, the program repeats the cooking end procedure described above and after the
4.5Manual mode cooking
Use the knob to select the "easy" program (
*).
The special feature of this
This means that an "empty" program is always immediately available for quick, easy editing.
4.5.1 How to use this program
Use the knob to select the "easy" program (
*).
27
