6Solution suggestions for problems
Problem | Cause | Explanation / Suggestion | |
Drying process takes | Cover filter and filter drawer might have | * Clean the cover filter and Filter drawer. | |
too much time. | not been cleaned. |
| |
|
|
| |
| * Cover filter and filter drawer might |
| |
Laundry come out wet | have not been cleaned. | * Clean the cover filter and Filter drawer. | |
at the end of drying. | * Excessive laundry might have been | * Do not overload the machine. | |
| loaded in. |
| |
| * It might have not been plugged in. | * Make sure that the machine is plugged | |
| * The loading door may be ajar. | ||
| in. | ||
| * Program might have not been set or | ||
Machine does not | * Make sure that the loading door is | ||
the “Start/Pause/Cancel” button might | |||
switch on or the | properly closed. | ||
have not been pressed. | |||
program does not | * Make sure that the program has been | ||
* “Childproof lock” might have been | |||
start. Machine is not | set and it is not in “Pause” mode. | ||
activated. | |||
activated when set. | * Deactivate the childproof lock. | ||
* The condenser cover on the models | |||
| * Make sure that the condenser cover | ||
| with a condenser might not be closed | ||
| and the red lock is closed securely. | ||
| securely. | ||
|
| ||
Program has been |
| * Make sure that the loading door is | |
* The loading door may be ajar. | properly closed. | ||
interrupted without | |||
* Electricity may be cut off. | * Press “Start/Pause/Cancel” button to | ||
any cause. | |||
| start the program. | ||
|
| ||
|
| * Dry only the laundry which is suitable | |
Laundry has shrunk, |
| for drying in your machine after checking | |
* A program suitable for the laundry | the labels on your clothes. | ||
become felted or | |||
type might have not been used. | * Select a program with suitable low | ||
deteriorated. | |||
| temperature for the laundry type to dry | ||
|
| ||
|
| your clothes. | |
Drum lightning does | * The machine might have not been | * Make sure that the machine is On. | |
not come on. | |||
started by using the On/Off button. | * Call the authorized service to replace | ||
(for models equipped | |||
* Bulb may have blown. | the bulb. | ||
with a lamp) | |||
|
| ||
“Final / | * The | * Turn off the machine and take out the | |
prevent laundry from creasing might | |||
LED flashes. | laundry. | ||
have been activated. | |||
|
| ||
“Final / | * Program has come to an end. | * Turn off the machine and take out the | |
LED is on. | laundry. | ||
| |||
|
|
| |
The “Drying” LED | * A heat sensor failure has occurred. | * Turn off the machine and take out the | |
Machine ends the program without | |||
flashes. | laundry. Call your authorized service. | ||
heating. | |||
|
| ||
Also for products equipped with a condenser |
| ||
|
|
| |
“Water tank” warning | * Water may be full. |
| |
* | * Drain the water in the water tank. | ||
LED is on. | |||
running. |
| ||
|
| ||
“Filter cleaning” LED | * Filter might have not been cleaned. | * Clean the cover filter. | |
is on. | |||
|
| ||
|
|
| |
“Condenser cleaning” | * Filter drawer/Condenser might have | * Clean the filters in the condenser/filter | |
LED is on. | not been cleaned. | drawer under the kick plate. | |
|
|
| |
A Call an authorized service if the problem persists.
12 - EN
