Zanussi ZOB 160 manual Something not working, Symptom, Solution

Something not working

If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Force Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

SYMPTOM	SOLUTION
„ The oven does not come on	‹ Check that both a cooking function and temperature
	have been selected.
	‹ Check the appliance is wired in properly, and the
	socket switch or the switch from the mains supply to
	the oven are ON.
„ The oven temperature light does not come on	‹ Select a temperature with the thermostat control
	knob
	‹ Select a function with the oven function control
	knob.
„ The oven light does not come on	‹ Select a function with the oven function control
	knob
	‹ Check the light bulb, and replace it if necessary
	(see "Cleaning the Oven")
„ It takes too much time to finish the dishes, or they	‹ The temperature may need adjusting
are cooked too fast.
	‹ Refer to the contents of this booklet, especially to
	the chapter “Using the Oven”.
„ Steam and condensation settle on the food and the	‹ Leave dishes inside the oven no longer than 15-20
oven cavity.	minutes after the cooking is completed.

If after all these checks, the oven still does not work, contact your local Service Force Centre quoting your model and serial number, which can be found on the rating plate. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

12