Maintenance and Cleaning
Automatic Defrosting of the Refrigerator
There is no need to defrost the refrigerator, because ice depositing on the inner back wall is defrosted automatically.
Ice is depositing on the inner back wall during the compressor operation; later on, when the compressor is not operating ice is defrosting and water drops collect and drain through the outlet in the inner back wall into the drain pan situated above the compressor, from where it evaporates.
Manual Defrosting of the Freezer
When the frost and ice layer in the freezer is
•Few hours before defrosting set the thermostat to position 7, so that packages are well frozen. Reset the thermostat to STOP (0) position and disconnect the power supply. Empty the freezer and take care that the packages remain frozen.
•Insert the enclosed pipe into the
groove in the bottom of the appliance and place a vessel underneath to collect the defrost water. Defrosting is accelerated if the door is left open.
• Avoid using defrosting sprays, as they may cause damage to the
plastic parts and may be hazardous to health.
Cleaning the Appliance
Disconnect the power supply before cleaning the appliance.
Do not use coarse or aggressive cleaning agents as you can damage the surface.
Be careful to remove any cleanser agent remaining after cleaning.
•Clean the exterior with water and detergent.
Varnished surfaces are cleaned with soft cloth and an alcohol based cleaning agent (for example glass cleaners). You may also use alcohol (ethanol or isoprophylic alcohol).
The application of abrasive and specially aggressive cleaners, such as the stainless steel cleaners, is not appropriate for the cleaning of plastic and coated parts.
70 | Instructions for Use |
