Before Putting Into Use
• Before connecting the appliance to the mains supply, leave it for about 2 hours to stand in place where it will later on be installed. This will reduce the possibility of malfunctions in the cooling system that might have occurred due to transport handling.
•Clean the appliance thoroughly, especially the interior (see Cleaning and Maintenance).
Instructions for Use
These instructions for use were prepared for the user. They describe the appliance and its correct and safe use. They were prepared for various types/models of appliances therefore you might find in it some functions that do not apply to your appliance.
We Care for the Environment
•Our products use environmentally friendly packaging, which can be either recycled or disposed of in an environmentally friendly manner. To this end, individual packaging materials are clearly marked.
•These instructions are printed either on recycled paper or chlorine free bleached paper.
•When your appliance finally wears out, please try not to burden the environment with it; call your nearest authorised service agent. (See Disposing of the Worn Out Appliance)
Tips for Energy Saving
•Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, mind to close it as soon as possible. This is especially important if you have an upright model.
•Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
•Turn the thermostat knob from higher to lower setting as soon as possible.
•Never use continuous operation unless unnecessarily required; switch the operation mode selection switch to the setting for automatic operation whenever possible.
•Before freezing packages of fresh foods, make sure they are cooled to ambient temperature.
•Ice and frost layer increase energy consumption, so do clean the appliance as soon as the layer is
60 | Instructions for Use |
