Before Putting Into Use
•Before connecting the appliance to the mains supply, leave it stand for about 2 hours which will reduce the possibility of malfunctions in the cooling system that might have occurred due to transport handling.
•Clean the appliance thoroughly, especially the interior (see Cleaning and Maintenance).
•Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.
•Sound alarm reminds you to close the door immediately, in order to save energy.
Instructions for Use
These instructions for use were prepared for the user. They describe the appliance and its correct and safe use. They were prepared for various types/models of appliances therefore you might find in it description of some functions and accesories that do not apply to your appliance.
We Care for the Environment
•Our products use environmentally friendly packaging, which can be either recycled or disposed of in an environmentally friendly manner. To this end, individual packaging materials are clearly marked.
•These instructions are printed either on recycled paper or chlorine free bleached paper.
•When your appliance finally wears out, please try not to burden the environment with it; call your nearest authorised service agent. (See Disposing of the Worn Out Appliance)
Tips for Energy Saving
•This is especially important if you have an upright model.
•Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
•Turn the thermostat knob from higher to lower setting as soon as possible (depends on how loaded the appliance is, ambient temperature...)
•Never use continuous operation unless unnecessarily required; switch the operation mode selection switch to the setting for automatic operation as soon as possible.
•Before freezing packages of fresh foods, make sure they are cooled to ambient temperature.
•Ice and frost layer increase energy consumption, so do clean the appliance as soon as the layer is
•If the gasket is damaged or if it turns out that the sealing is poor, the energy consumption is substantially higher. To restore efficiency, replace the gasket.
•The condenser on the rear wall should be always clean, free of dust or any impurities.
48 | Instructions for Use |
