Placing and Installation
Choosing the Right Place
Place the appliance in dry and well ventilated room. Allowed ambient temperature depends on the model (class) of the appliance and is stated on the rating plate of the appliance. Never place the appliance near heat emitting devices (e.g. cooker, radiator, water heater and similar devices) and do not expose it to direct sunlight.
The appliance should be positioned at least 3 cm away from the electric or gas cooker and at least 30 cm away from the oil or coal stove. If this is not possible, use an appropriate insulation. Behind the appliance there should be free space at least 200 cm² wide and above the appliance the high kitchen units should be at least 5 cm away from the appliance in order to assure adequate ventilation of the condenser unit.
| Class | Ambient temperature | |
| SN | from + 10°C to + 32°C | |
| N (normal) | from + 16°C to + 32°C | |
| ST | from + 18°C to + 38°C | |
| T (tropical) | from + 18°C to + 43°C | |
Placing the Appliance |
|
| |
| Connection to Power Supply | ||
•Place the appliance firmly on a solid base. Some appliances have adjustable feet on the front side; use them to level the appliance.
•Two spacers attached to the appliance must be fitted onto the upper edge of the condenser, thus preventing the appliance from being installed too close to the wall. Spacers are manufactured for
Connect the appliance with the cable and plug to the power supply socket outlet with a ground terminal (safety socket).
Required nominal voltage and frequency are indicated on the rating plate.
The connection to the mains supply and earthing have to be made according to current standards and regulations. The appliance resists temporary voltage tolerance up to
50 | Instructions for Use |
