Care and Maintenance

Buckle Removal

1 From the bottom of the carrier, locate metal buckle strap retainer.

2 Pull retainer away from carrier to loosen.

3Turn the retainer so that the short side will go through the A slot in the carrier shell to the opposite side of the carrier (fig. A).

4Thread the retainer through the hole in cover to remove buckle from carrier.

Buckle Installation

1Turn the buckle retainer (fig. B) so that the short side will go through the

slot in the cover and carrier shell.

2 Pull buckle away from carrier until

 

 

 

 

B

Buckle Retainer

tight, then verify that the strap is not

 

 

 

 

 

twisted and the release button is facing outward.

IMPORTANT: Verify that retainer is threaded through both the cover AND the shell.

Care and Maintenance

Cleaning the Buckle

If a child eats and drinks while in the carrier, the buckle may need to be periodically checked and cleaned of any accumulated debris or dried liquids.

THOROUGHLY RINSE, using warm water (fig. C).

SOAK, overnight if possible, using warm water to loosen hardened C drinks or food.

TEST THE BUCKLE, by fastening and unfastening until a positive click is heard. If a click is not heard, repeat cleaning procedure.

TOWEL DRY

DO NOT: Lubricate, use solvents, abrasive cleaners, soap or household detergents.

32

33

Page 18
Image 18
Britax Baby Accessories manual Care and Maintenance, Buckle Removal, Buckle Installation, Cleaning the Buckle