Britax Baby Accessories manual Checking Harness Height, Harness Height Adjustment

Models: Baby Accessories

1 21
Download 21 pages 16.92 Kb
Page 9
Image 9

Using the Carrier

Checking Harness Height

1 Place child in carrier, then secure harness (see pages 12–13).

2 Observe where the harness is positioned on the child’s shoulders.

Harness straps must be located at or slightly below the child’s shoulders.

3 If harness height

is correct, continue

using child carrier

without adjustment.

Rear Facing Strap Height

Harness Height Adjustment

1Loosen harness completely.

2From the rear of the carrier, unhook the harness straps from the yoke (fig. A).

3Lean head support pillow forward, then pull straps through the shell and cover.

It is not necessary to pull straps through slots in the head support pillow.

Using the Carrier

A

If harness height requires adjustment,

refer to Harness Height Adjustment on

page 15.

4 Thread the harness straps through slots cover and shell, at the new height (fig. B).

5 Reattach harness straps to the yoke (fig. C).

6Pull harness adjuster strap to tighten the harness.

7 Verify that all straps are threaded at the

B

same height and are not twisted.

 

C

14

15

Page 9
Image 9
Britax Baby Accessories manual Checking Harness Height, Harness Height Adjustment