Care and Maintenance
Cover Removal
1Unhook attachment loops.
2Loosen harness completely.
3From the bottom of the carrier, unhook both harness straps from the yoke.
4From the top of the carrier, pull each harness strap through the upper harness slot, head support pillow and cover slot to the top of the carrier.
5Unfasten buckle.
6Pull the harness straps, buckle tongues, and chest clip through the slots in the cover.
7Remove buckle and belly pad.
8Remove cover and head support pillow from the carrier.
WARNING:
•Do not take harness apart or completely remove from carrier. It is unnecessary and dangerous to do so.
•Never remove the buckle tongues from the harness. They cannot be reattached after removal.
Refitting the Cover
To refit the cover, reverse Cover Removal directions. Make sure that the harness is not twisted.
Care and Maintenance
Cleaning the Cover, Belly pad & Head Support Pillow
•HAND WASH, using cold water and mild soap.
•LINE DRY, to prevent shrinkage.
•DO NOT: Bleach, machine wash, machine dry, or iron.
Cleaning the Shell & Harness
•BRUSH AWAY LOOSE DEBRIS, using a soft bristled brush.
•SPONGE CLEAN, using warm water and mild soap.
•TOWEL DRY
•DO NOT: Use solvents, abrasive cleaners, or bleach. Do not machine wash, machine dry, or disassemble the harness.
Cleaning the Harness Adjuster
WARNING: Periodically check the adjuster area to be sure it is clean and free of food, coins, dirt, and other objects. If debris is present, it must be removed to prevent interference with the adjuster mechanism.
•BRUSH AWAY LOOSE DEBRIS, using a soft bristled brush.
•SPONGE CLEAN, using warm water and mild soap.
•TOWEL DRY
•DO NOT: Use solvents, abrasive cleaners, or disassemble the harness.
34 | 35 |
