Manuals / Smeg / Kitchen Appliance / Dishwasher

Smeg DD612S7 manual User instructions, Washing programs, Lighting, Programming

Models: DD612S7

1 41

Download 41 pages 1.42 Kb

Page 5

Image 5

User instructions

1.2 Washing programs

The dishwasher is equipped with a control panel, described in chapter "1. Description of the controls", from which it is possible to carry out all the power switch-on, switch-off and programming operations.

Before starting a washing program make sure that:

The water supply tap is open.

The correct amount of detergent has been added to the dispenser.

The baskets have been correctly loaded.

The spray arms are able to rotate freely and without obstruction.

The dishwasher door is securely closed.

LIGHTING

When the ON/OFF button (1) is pressed, the dishwasher switches on and the light (6) comes on. About 2 seconds later, the PHASES/PROGRAM lights (10) will come on.

PROGRAMMING

In this model of dishwasher, all programming procedures can only be carried out with the door closed. As long as the door is open, the PROGRAMS lights (7) and PHASES/PROGRAM lights (10) will remain off.

Page 5

Image 5

Smeg DD612S7 User instructions, Washing programs, Before starting a washing program make sure that, Lighting, Programming

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS INSTRUCTION MANUALContents 1.1 Front panel User instructions1. Description of the controls 0,03 User instructions1.2 Washing programs User instructionsBefore starting a washing program make sure that The correct amount of detergent has been added to the dispenserUser instructions PHASES/PROGRAM light 10 will remainSELECTION PROGRAM START PROGRAMEND PROGRAM User instructionsINTERRUPTION OF A PROGRAM TO CHANGE A PROGRAMANNULLING A PROGRAM User instructionsUser instructions After selecting the delay, start the program see relative sectionUser instructions To set the delay once the program has started, proceed as followsTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT User instructionsTO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT REMOVING THE DISHESWATER HARDNESS TABLE ADJUSTING THE WATER SOFTENING SYSTEMUser instructions User instructions 2. TroubleshootingWARNINGS AND RECOMMENDATIONS, GUIDE FOR THE USE OF BASKETS AND FOR CLEANING DISHWASHERSINSTRUCTION MANUAL Contents 1. Safety and operating instructions Safety instructionsUSES OTHER THAN THOSE DESCRIBED ABOVE NEVER BE REMOVEDSafety instructions AQUASTOP MODELS Safety instructionsAPPLIANCE Safety instructionsFor free-standing models only Installation instructions2. Installation and hook-up CONNECTING TO THE WATER SUPPLY Installation instructions2.1 Water supply connection DRAIN CONNECTION2.2 Electrical connection and precautions Installation instructionsNEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORDWHEN CLEANING AND MAINTAINING THE APPLIANCE Installation instructionsFuse replacement FOR GREAT BRITAIN ONLY3.1 Using the water softening system User instructions3. Operating instructions User instructions 3.2 Using the rinse aid and detergent dispensersADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGUser instructions During the washing cycle, the dispenser will be opened automatically User instructionsADDING THE DETERGENT 3/1 Products User instructions3.3 General warnings and recommendations User instructionsCorrect loading of the dishes helps ensure optimal washing results MAKE SURE that the items being washed are dishwasher-safeDishes and objects in copper, tin, zinc or brass these tend to stain User instructionsItems which are not dishwasher-safe User instructions 3.4 Using the basketsEN 50242 STANDARD LOADS FOR CERTIFICATION BODIES LOWER BASKETLOADING THE LOWER BASKET User instructionsLOWER BASKET CUTLERY BASKET User instructionsUPPER BASKET User instructionsLOADING THE UPPER BASKET User instructionsLoading examples ½ LOAD certain models only ½ LOAD for AAA models only see energy labelUser instructions ADJUSTING THE UPPER BASKETPull-out version Push-button versionCLEANING THE WATER INTAKE FILTER 4. Cleaning and maintenanceCLEANING THE SPRAY ARMS User instructionsGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE CLEANING THE FILTER UNITUser instructions PROLONGED DISUSEIf the dishes are not being cleaned properly, check that TROUBLESHOOTING MINOR PROBLEMSUser instructions BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSEIf the dishes fail to dry or remain dull, check that User instructionsIf the dishes show signs of streaking, staining, etc., check that If there are visible traces of rust inside the tankdes ressortslateraux avant l’installation mollelaterali primadell’installazioneMontare la porta e regolarelatensione delle einstellen

1.2 Washing programs

Before starting a washing program make sure that:

￿The correct amount of detergent has been added to the dispenser.

LIGHTING

PROGRAMMING

The correct amount of detergent has been added to the dispenser.