Manuals / Smeg / Kitchen Appliance / Dishwasher

Smeg DF410BL1 Washing programs, Before starting a washing program make sure that, Lighting

Models: DF410BL1

1 32

Download 32 pages 34.7 Kb

Page 12

3.3 Washing programs

User instructions

3.3 Washing programs

The dishwasher is equipped with a control panel and an INFORMATION DISPLAY (9) from which it is possible to carry out all the power switch- on, switch-off and programming operations.

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without obstruction.

•The dishwasher door is securely closed.

LIGHTING

Pressing the ON/OFF button (1) will start the dishwasher and will lit up the dishwasher pilot light (6). After approximately 3 second from this operation the DISPLAY (8) will be turned on with a visualization that will depend upon the state of the dishwasher.

PROGRAMMING

In this dishwasher model all the programming operations are possible only with closed door. With open door, on the DISPLAY (8) will appear the symbols --and the PILOT LIGHT PROGRAMS (7) remains out.

11

Image 12

Smeg DF410BL1 Washing programs, Before starting a washing program make sure that, Lighting, Programming, User instructions

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents Safety instructions 1. Safety and operating instructionsSafety instructions THIS DISHWASHER MUST BE USED BY ADULTSSafety instructions AQUASTOP MODELSInstallation instructions 2. Installation and hook-up2.1 Water supply connection CONNECTING TO THE WATER SUPPLY DRAIN CONNECTIONInstallation instructions 2.2 Electrical connection and precautions IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORDInstallation instructions Fuse replacement User instructionsFOR GREAT BRITAIN ONLY DELAY PROGRAM BUTTON POWER ON LIGHTPROGRAMS INDICATOR LIGHTS 3. Description of the controlsUser instructions Only run the soak program with half loads3.3 Washing programs Before starting a washing program make sure thatThe correct amount of detergent has been added to the dispenser LIGHTINGSELECTION PROGRAM START PROGRAMEND PROGRAM INTERRUPTING A PROGRAMTO CHANGE A PROGRAM STOPPING A PROGRAMUser instructions User instructions Particularly, on the display it will have the following indicationsTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES User instructions4.1 Using the water softening system 4. Operating instructionsUser instructions User instructions 4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLEUser instructions ADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AIDUser instructions ADDING THE DETERGENT User instructionsDuring the washing cycle, the dispenser will be opened automatically 4.3 General warnings and recommendations 3/1 ProductsCorrect loading of the dishes helps ensure optimal washing results User instructionsDishes and objects in copper, tin, zinc or brass these tend to stain User instructions4.4 Using the baskets LOWER BASKETLOADING THE LOWER BASKET User instructionsCUTLERY BASKET UPPER BASKETUser instructions VerticalADJUSTING THE UPPER BASKET LOADING THE UPPER BASKETUser instructions 5. Cleaning and maintenance CLEANING THE WATER INTAKE FILTERCLEANING THE SPRAY ARMS 5.1 General warnings and recommendationsCLEANING THE SPRAY ARM, TRAVELLING VERSION CLEANING THE FILTER UNITUser instructions GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE TROUBLESHOOTING MINOR PROBLEMSPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tapIf the dishes are not being cleaned properly, check that If the dishes fail to dry or remain dull, check thatIf the dishes show signs of streaking, staining, etc., check that If there are visible traces of rust inside the tank6. Troubleshooting TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEMFAULT DESCRIPTIONTECHNICAL DATA Height Capacity Water supply pressure Electrical characteristicsUser instructions Width