User instructions
•Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system.
•When necessary, refill the regenerating salt container before starting the washing program. In this way, the excess saline solution will be immediately removed by the water; the prolonged presence of salt water inside the tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding detergent to the salt container will damage the water softening system.
ADDITIONAL FUNCTIONS (Customizing the consumer parameters) (available in all programs except the soak program)
The electronic control system allows personalizing the machine use directly through a programming procedure not directly accessible that allows: regulate water hardness level.
To access the programming environment, the appliance must be turned on with the door closed. Then proceed as follows:
•press the PROGRAM DELAY (4) button until the H symbol appears on the display, followed by the number 3, > H3;
•press the PROGRAM DELAY (4) button the number of times needed to select the right setting level for the hardness of the water (H0, H1, H2, H3, H4, H5);
•press the START/STOP (5) button to confirm the setting and return to the program setting menu.
N.B.: after 2 minutes, the appliance exits the parameter setting menu automatically.
17
