Dish Network 112182, Solo 508, Solo 501 manual Use the Troubleshooting Tables, Dolby Digital Sound

			Use the Troubleshooting Tables
DOLBY DIGITAL SOUND
	What’s	What’s Wrong	What You Can Do
	Happening
	Instead of Dolby®	• Maybe the program you’re watching	• Not all programs have Dolby Digital sound. Check the program’s
	Digital sound, you	doesn’t have Dolby Digital sound.	Program Guide entry for the (DD) mark.
	hear only regular	• Maybe you selected the wrong sound	• On the Dolby Digital Setup menu, select the Dolby Digital Only
	stereo or non-stereo
		option on the Dolby Digital Setup	option if the amplifier/decoder can process only Dolby Digital signals, the
	sound.
		menu.	PCM Only option if the amplifier can’t process Dolby Digital, and the
		• Maybe the amplifier/decoder can’t	Dolby Digital/PCM option only if the amplifier can process both regular
			and Dolby Digital sound. Note: If you select the
		process Dolby Digital sound.
			Dolby Digital/PCM option and the amplifier/decoder can’t process
		• Maybe you didn’t connect the receiver
			Dolby Digital, you could damage the speakers.
		to an amplifier/decoder.	• If the amplifier/decoder can’t process Dolby Digital, it won’t provide
			Dolby Digital sound. See the amplifier user’s manual or call your audio
			electronics dealer for more info.
			• Make sure you connect an amplifier/decoder that can process Dolby
			Digital sound to the receiver’s back panel DOLBY DIGITAL output.
	EVENT TIMERS
	What’s	What’s Wrong	What You Can Do
	Happening
	You want to use	You highlighted a future program in the	To use Quick Record, highlight a future program but don’t press
	Quick Record, but	Browse Banner, in the Program	the SELECT button. Instead, press the RECORD button.
	the receiver displays	Guide, or in a Themes list, and then	Note: You can use the Create an Event Timer menu if you want,
	the Create an Event	pressed the SELECT button.
	Timer menu.		because it’s almost as fast as Quick Record.
	You try to set an	You must enter the password before you	First enter the password, then you can set an event timer for the program.
	event timer and	can set an event timer for a locked
	the receiver	program.
	displays a message
	that the program is
	locked.
	You try to set an	You must order a pay per view event	First order the event, then you can set an event timer for it.
	event timer and	before you can set an event timer for it.
	the receiver
	displays a message
	that the program is
	a pay per view
	event.
	You try to set an	You’ve already set as many event timers	Delete one of the event timers you set earlier, and then you can set
	event timer, but	as you can.	a new event timer.
	the receiver
	displays an Error
	message that gives
	you the choice to
	delete an event
	timer you set
	earlier.
	You set an event	Maybe you set a Reminder Event Timer	Remember, a Reminder Event Timer just reminds you the program is about
	timer, but the	but you should have set a DVR Event	to start. An Auto-Tune Event Timer reminds you and tunes the receiver to
	receiver doesn’t	Timer, an Auto-Tune Event Timer, or a	the channel of the program. A VCR Event Timer reminds you, tunes the
	tune to the channel	VCR Event Timer.	receiver, and starts the VCR to record. A DVR Event Timer reminds you,
	of the program, or		tunes the receiver, and starts the receiver to record with the DishDVR
	doesn’t record the		features.
	program.		Note: The receiver won’t turn the VCR on, so you must leave it turned on.
			Note: A DVR Event Timer can work only if the receiver has enough room
			to record. See the DishDVR Features table for help.

Page 107