Test the System
TEST THE SYSTEM
START ANY TEST
1.Press the MENU button.
2.Select the System Setup option.
3.Select the Diagnostics option. Note: “Diagnostics” are just “tests.”
4.Select the option for the test you want to do.
Note: If we upgrade the receiver software,we may add new tests.
TEST THE PHONE CONNECTION
1. Make sure you connect a phone line to the receiver’s back panel
PHONE JACK.
2.Select the Connection option.The receiver displays a message that asks you to wait until the test is done.
•If the phone connection is okay, the receiver displays a message that says so.
•If the receiver displays a message that it needs to make a
it finishes the call. When the receiver finishes the call, select the Cancel option.
•If you didn’t connect the phone line right, the receiver displays a message that says so. Check the phone connection and then do the test again.
Note: If you have a Digital Subscriber Line (DSL), you may need to install a DSL filter between the receiver and the telephone wall jack, and then do the test again.
Page 119
