Control Other Devices with the Remote
Set Up the Remote Control
You can set up the remote to control other devices using the device codes listed on page 120.
1.Turn the device on.
2.Find the brand name of the device in the tables starting on page 120.
3.Press and hold the mode button until all the other mode buttons light up, and then let go of the button.
The mode button flashes.
4.For AUX mode only. Press 0 for a second TV, or 1 for a second VCR, or 2 for a tuner, amplifier, or cable box.
5.Enter one of the
6.If you want to program limited mode, press 1. If not, skip to step 7.
7.Press the POUND (#) button.
8.Press the blank POWER button to turn off the device. If the device does not turn off, go to step 10.
9.Turn the device back on and try some other buttons to make sure they work. If the code works for other buttons, stop here.
10.If the code doesn’t work, redo steps 3 through 9 with another device code from the tables.
11.If you can’t find a code that works try, Scan for Device Codes below.
Use the device’s front panel buttons or its remote control.
If the brand isn’t listed, see Scan for Device Codes on page 70.
For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, the TV mode light will flash.
This step is for programming which kind of device that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 5.
The
See Limited Mode for more information.
If you entered the code correctly, the mode button flashes three times.
If the code works, the device should turn off.
Sometimes the blank POWER button works when other buttons don’t.
Try every code listed for you brand until one works for your device.
Page 69
