Installation Preparation
Check if the refrigerator can pass a doorway or enter a door first.
Dimensions (including Door Handles)(Width*Depth*Height) 903mm 734.5mm 1790mm
If the refrigerator can not pass through a door during installation, follow these steps.
Removing Freezer Door
Remove front bottom cover first, if it is attached.
Remove the bottom cover first. | Unscrew top hinge cover with a | Turn top hinge fastener |
1Pull out the left collar of the coupling | 2 screw driver. | 3counterclockwise 3~4 times. |
first, then hold the coupling and pull out |
| Disconnect the harness wires. |
the left water tube. |
|
|
(Dispenser Models Only) |
|
|
| ! |
|
4 | Lift up the front of hinge to remove. | Be careful not to damage the water line |
( After the hinge is removed the door | 5 when removing the door. | |
| can fall down forward. Be careful !) |
|
Find a suitable place to install
Sufficient space from refrigerator back to the wall for free | Avoid direct sunlight. |
air ventilation |
|
|
|
Once the installation place is ready follow the installation instructions.
If surround temperature of refrigerator is low (below 5), foods can be frozen or the refrigerator can work in abnormal way.
Removing Refrigerator Door
Unscrew top hinge cover with a | Turn top hinge fastener | 3 | Lift up the front of hinge to remove. |
1screw driver. | 2 counterclockwise 3~4 times. | (After the hinge is removed the | |
Insert a thin screw driver into the | Disconnect harness wires. |
| door can fall down forward. Be |
side groove of the cover to remove. |
|
| careful !) |
| ! |
|
|
4Lift the door straight up to remove.
16 | 17 |