Smeg FME20TC manual During operation, Interrupting Oven Operation, Energy Saving

During operation...

The oven door may be opened at any time during the cooking operation, in which case:

-THE PRODUCTION OF MICROWAVE POWER IS IMMEDIATELY HALTED;

-The grill is switched, but remains at a high temperature;

-The Timer is automatically stopped indicating the remaining cooking time.

If necessary, it is now possible to:

-Stir or shake the food in order to improve uniform cooking;

-Adjust the microwave power level by pressing the pre– (5) or + (13) keys;

-Select another function, by pressing the function (2, 3, 4, 9, 10, 11, 12) keys;

-Adjust the remaining operating time by pressing the – (6) and + (14) keys;

Close the door again and press the START key (7). The oven will commence operation once again.

Interrupting Oven Operation

In order to stop oven operation before the end of the programmed time, press the STOP key (15) or open the door.

If you do not intend to continue heating the food, then close the door and press the STOP key once again(15). The oven will beep and the Screen (1) will display the clock.

At the end of the operating time, the oven will switch off, beep three times and the Screen (1) will display the word “End”. The beeps are repeated every thirty seconds until the door is opened or the STOP key (15) is pressed.

Energy Saving

This microwave has a special energy-saving mode, which cuts in automatically after ten minutes of inactivity.

In energy-saving mode, all the keys on the panel go off and the display (1) shows the time.

The energy saving mode is immediately deactivated when a function key is pressed.

11