Smeg FS67MFX manual Instructions for the installer, Installation Of The Appliance

Models: FS67MFX

1 16
Download 16 pages 20.67 Kb
Page 4
Image 4
Instructions for the installer

Instructions for the installer

2 INSTALLATION OF THE APPLIANCE

It is the law that all appliances are installed by competent persons.

This appliance may be installed next to a wall which is higher than the appliance, with a minimum distance of 50 mm from the side of the appliance, as shown in the diagram showing the correct installation conditions. Any wall cupboards or shelves must be at a distance of at least 750 m above the work surface.

2.1Electrical connection

Make sure that the power line voltage matches the specifications indicated on the rating plate located inside the storage compartment.

This rating plate must never be removed.

If the appliance is connected to the supply by means of a fixed connection, install a multipolar cut-out device on the line, with contact opening distance equal to or greater than 3 mm, located near the appliance and in an easily reachable position.

The connection terminals are located at the rear of the appliance. For electrical connections see following diagram. To access, remove the rear cover.

6

Page 4
Image 4
Smeg FS67MFX manual Instructions for the installer, Installation Of The Appliance, This rating plate must never be removed