HP 3200 manual Installing a new document scanner separation pad

Installing a new document scanner separation pad

The document scanner separation pad is a user-replacable part that is ordered as part of a kit for the HP LaserJet 3200 product.

The separation pad kit for document scanner path — part number RY7-5055-000CN — contains three pieces:

lDocument scanner separation pad

lSeparation mylar

lPad holder

When to replace the document scanner separation pad

Replace the document scanner separation pad when the document scanner feeds multiple sheets at once through the scanner path (double-feeds or multi-feeds). Recurring multi-feed problems indicate that the document scanner separation pad is worn.

To install a new document scanner separation pad

1Open the document release door.

2Rotate the strap on the left side of the product door to unhook the strap.

3Grasp the separation pad and mylar sheet together (callout 1 in the graphic below) and lift them straight away from the document release door. This action should also release the pad holder (callout 2 in the graphic below).

4Press the new pad holder, with pad and mylar attached, into position. It should snap into place.

5Rehook the strap and close the document release door.

EN Product Maintenance 225