Changing general default settings

This section contains instructions for:

lChanging the default paper size for the paper input tray

lChanging sound volume

lChanging the language on the display panel

lRestoring factory defaults

Changing the default paper size for the paper input tray

 

The paper size should be set to the size of paper you normally load in

 

the paper input tray. The product uses this setting for copying,

 

printing reports, and determining autoreduction for incoming faxes.

 

 

Note

The printing function does not use this setting. If you are loading

 

special-size media for only your current print job, do not change this

 

setting. After you have finished printing, reload the original paper.

 

 

To change the default paper size

1Press ENTER/MENU.

2Use the < or > key to select COMMON SETTINGS, and then press

ENTER/MENU.

3Use the < or > key to select DEFAULT PAPER SIZE, and then press ENTER/MENU.

4Use the < or > key until the size of paper you have loaded appears. You can choose LETTER, LEGAL, or A4.

5Press ENTER/MENU to save your selection.

38 Chapter 3 - Managing General Default Settings, Logs, and Reports

EN

Page 40
Image 40
HP 3200 manual Changing general default settings, Changing the default paper size for the paper input tray