HP 3200 manual Canceled Fax, Problem Solving and Product Maintenance

Message	Cause	Solution
62.X PRINTER	The product has experienced an internal	Disconnect the power cable from the
ERROR	hardware error.	product, wait at least 30 seconds, then
		reconnect the power cable and wait for
		the product to initialize. If the message
		does not clear, the product will need
		service.
79 SERVICE	The product has experienced an internal	Disconnect the power cable from the
(####)	hardware error.	product, wait at least 30 seconds, then
		reconnect the power cable and wait for
		the product to initialize. If the message
		does not clear, the product will need
		service.
80 SERVICE	The product has experienced an internal	Disconnect the power cable from the
(####)	hardware error.	product, wait at least 30 seconds, then
		reconnect the power cable and wait for
		the product to initialize. If the message
		does not clear, the product will need
		service.
81 SERVICE	The product has experienced an internal	Disconnect the power cable from the
(####)	hardware error.	product, wait at least 30 seconds, then
		reconnect the power cable and wait for
		the product to initialize. If the message
		does not clear, the product will need
		service.
CANCELED	The STOP/CLEAR key was pressed to	Pull the document release door open,
COPY.	cancel the current job while pages were	remove the jammed item, and close the
	feeding from the document feeder. The	door. Then, clear the items in the
CLEAR
	cancel process will not automatically clear	document feeder tray and start over.
DOCUMENT	the document feeder.
FEEDER
CANCELED FAX.	The STOP/CLEAR key was pressed to	Pull the document release door open,
CLEAR	cancel the current job while pages were	remove the jammed item, and close the
	feeding from the document feeder tray.	door. Then, clear the items in the
DOCUMENT
	The cancel process will not automatically	document feeder tray and start over.
FEEDER.	clear the document feeder.
CANCELED	The STOP/CLEAR key was pressed to	Pull the document release door open,
SCAN.	cancel the current job while pages were	remove the jammed item, and close the
	feeding from the document feeder tray.	door. Then, clear the items in the
CLEAR
	The cancel process will not automatically	document feeder tray and start over.
DOCUMENT	clear the document feeder.
FEEDER
COMMUNICATION	Fax communication error occurred	Allow the product to retry sending the
ERROR	between the product and the sender or	fax.
	receiver.	Unplug the product telephone cord from
		the wall, plug in a telephone, and try
		making a call.
		Plug the product phone cord into a jack
		for another phone line.
		See “Resolving fax problems” on
		page 149.

196 Chapter 8 - Problem Solving and Product Maintenance EN