HP 3200 manual Changing the default contrast and resolution for outgoing faxes, Hint

Note

Hint

Changing the default contrast and resolution for outgoing faxes

The contrast affects the lightness and darkness of an outgoing fax as it is being sent. Resolution affects the sharpness of outgoing faxes. It also affects the transmission speed of faxes. See “Resolution options” on page 62 for more information.

To change the default contrast

The default contrast is the contrast normally applied to items being faxed. The slider is set to the middle as the default contrast setting.

If you only want to change the contrast for the current job, see “Using the Contrast button to adjust the contrast for the current fax or copy job” on page 61.

You might want to test the contrast settings on some documents before you set the default.

1Press ENTER/MENU.

2Use the < or > key to select FAX SETUP and then press ENTER/ MENU.

3Use the < or > key to select FAX SEND SETUP and then press

ENTER/MENU.

4Use the < or > key to select DEFAULT CONTRAST.

5Use the < key to move the slider to the left to make the fax lighter than the original, or use the > key to move the slider to the right to make the fax darker than the original.

6Press ENTER/MENU to save your selection.

EN Advanced send fax features and settings 81