HP 3200 manual Changing the default copy size, To change the default copy contrast

To change the default copy contrast

1Press ENTER/MENU.

2Use the < or > key to select COPY SETUP, and then press ENTER/ MENU.

3Use the < or > key to select DEFAULT CONTRAST.

4Use the < or > key to move the slider to the left to make the copy lighter than the original, or move the slider to the right to make the copy darker than the original.

5Press ENTER/MENU to save your selection.

Changing the default copy size

	The default copy size is the size to which copies are normally
	reduced or enlarged. If you keep the factory default size set to
	Original (100%), all copies will be the same size as the original
	document.
Note	If you only want to adjust the copy size for the job you are currently
	copying, see “Reducing or enlarging copies for the current job” on
	page 123.

To change the default copy size

1Press ENTER/MENU.

2Use the < or > key to select COPY SETUP and then press ENTER/ MENU.

3Use the < or > key to select DEF. REDUCE/ENLARGE and then press ENTER/MENU.

4Use the < or > key to select the option for how you normally want to reduce or enlarge copies. You can choose ORIGINAL (100%),

LEGAL TO LETTER, LEGAL TO A4, or A4 TO LETTER, LETTER TO A4, or CUSTOM (25-200%).

5Press ENTER/MENU to save your selection. -Or-

If you chose CUSTOM (25-200%), type the percentage of the original size that you normally want for copies, and then press ENTER/MENU to save your selection.

EN Default Copy Settings 127