Note

Note

4Load only one sheet at a time, top first, face down, into the document feeder tray.

If you are loading a business card, load it long edge first.

5Move the special media lever back to the left after special items have been fed. A stack of regular pages sent with the lever to the right can go through in multiples, and can cause jams.

Loading media to be printed

You can load media to be printed in paper input tray or in the single- sheet input slot. See the instructions in this section for more information.

Loading the paper input tray

You can load up to 125 sheets of 20 lb (75 g/m2) media into the paper input tray, or you can feed one sheet at a time into the single-sheet input slot.

Insert all media vertically (portrait orientation) into the paper input tray or single-sheet input slot. If you want to print horizontally (landscape orientation), make that selection through your software. The product cannot print on paper smaller than 3 by 5 inches (76.2 by 127 mm).

The product prints, copies, and prints received faxes using media from the paper input tray (or the single-sheet input slot).

To load the paper input tray

1Adjust the guides on the paper input tray to fit the size of media you are loading.

28 Chapter 2 - Getting to Know the Product

EN

Page 30
Image 30
HP 3200 manual Loading media to be printed, Loading the paper input tray, To load the paper input tray