To change the default resolution

 

The choices for this setting are Fine (the factory default), Standard,

 

Superfine, and Photo. See “Resolution options” on page 62 for more

 

information.

 

 

Note

If you only want to change the resolution for the fax job you are currently

 

sending, see “Adjusting the resolution for the current job” on page 62.

 

 

1Press ENTER/MENU.

2Use the < or > key to select FAX SETUP and then press ENTER/ MENU.

3Use the < or > key to select FAX SEND SETUP and then press

ENTER/MENU.

4Press ENTER/MENU to select DEFAULT RESOLUTION.

5Use the < or > key to select FINE (the default), STANDARD,

SUPERFINE, or PHOTO.

6Press ENTER/MENU to save your selection.

Selecting tone- or pulse-dialing mode

Use this procedure to set the product to tone- or pulse-dialing mode. You can use this procedure to set the product to tone- or pulse-dialing mode. The default is set to Tone. Leave this as Tone unless you know your telephone is incapable of tone dialing.

To select tone- or pulse-dialing

1Press ENTER/MENU.

2Use the < or > key to select FAX SETUP and then press ENTER/ MENU.

3Press > once to select SEND SETUP and then press ENTER/MENU.

4Use the < or > key to select DIALING MODE and then press

ENTER/MENU.

5Use the < or > key to select TONE or PULSE and then press ENTER/MENU to save your selection.

82 Chapter 4 - Faxing

EN

Page 84
Image 84
HP 3200 manual Selecting tone- or pulse-dialing mode, To change the default resolution, To select tone- or pulse-dialing