HP 3200 manual Renaming the printer driver, Resolving PostScript Errors

Note

Note

6Click Select PPD.

7Find the desired PPD in the list and click Select. If the desired PPD is not listed, choose one of the following options:

•Select a PPD for a printer with similar features.

•Select a PPD from another folder.

•Select the generic PPD by clicking Use Generic. The generic PPD allows you to print, but limits your access to printer features.

8In the Setup dialog box, click Select, and then click OK to return to the Chooser.

If you manually select a PPD, an icon might not appear next to the selected printer in the Select a PostScript Printer box. In the Chooser, click Setup, click Printer Info, and then click Update Info to bring up the icon.

9Close the Chooser.

Renaming the printer driver

If you are going to rename the printer driver, do this before selecting the printer in the Chooser. If you rename the printer driver after selecting it in the Chooser, you will have to go back into the Chooser and reselect it. Use the Set Printer Name feature in the HP LaserJet Utility to rename the printer driver.

This will not work for the fax or scanner driver.

Resolving PostScript Errors

The following situations are PS language specific and may occur when several printer languages are being used.

To receive a printed or screen displayed message when PS errors occur, do one of the following:

lOpen the Print Options dialog box and click the desired selection next to the PS Errors section.

lOpen the HP LaserJet Device Configuration tool. On the Advanced tab, select the Print PS Errors check box.

EN Common Macintosh problems 207