HP 3200 manual Changing sound volume, To change the fax sounds line monitor volume

Note

Note

Changing sound volume

You can control the volume of the following:

lThe fax sounds associated with incoming and outgoing faxes.

lThe ring for incoming faxes.

lThe alarm sound the product emits when it requires attention, such as when the printer door is open.

lThe beeps emitted when you press control panel keys.

To change the fax sounds (line monitor) volume

The default set at the factory is Soft.

1Press VOLUME.

2Use the < or > key to select OFF, SOFT, MEDIUM, or LOUD, and then press ENTER/MENU to save your selection.

To change ring volume

The ring volume is heard when the device is initially sending or receiving a call. The ring duration length is based on the local telecom ring pattern length.

The default set at the factory for ring volume is Soft.

1Press ENTER/MENU.

2Use the < or > key to select COMMON SETTINGS, and then press

ENTER/MENU.

3Use the < or > key to select VOLUME SETTINGS, and then press

ENTER/MENU.

4Press the > key once to select RING VOLUME, and then press

ENTER/MENU.

5Use the < or > key to select OFF, SOFT, MEDIUM, or LOUD, and then press ENTER/MENU to save your selection.

EN Changing general default settings 39