HP 3200 manual Canceled Send, Wait for the product to finish the current

Message	Cause	Solution
COPY COUNT	The product does not have enough	Continue completing the collated copy
SET TO 1	memory to complete the collated copy job.	job.
DEVICE BUSY.	The product is currently in use.	Wait for the product to finish the current
TRY AGAIN		job.
LATER
DEVICE ERROR.	There was an internal error in the product.	Press ENTER/MENU to resume the job.
PRESS
[ENTER] TO
RESUME
DOCUMENT	A piece of media is jammed in the	Open the document release door, clear
FEEDER JAM	document feeder tray.	the jam, close the document feeder tray,
		and reload the paper into the document
		feeder tray.
DOCUMENT	Paper in the document feeder tray was	Remove and reload the paper into the
FEEDER	not picked up.	document feeder tray.
MISPICK.
RELOAD MEDIA
FAX DOES NOT	Attempts to redial a fax number failed or	Call the recipient to ensure that fax
ANSWER	the redial on no answer option was turned	machine is on and ready.
	off.	Check that you are dialing the correct
CANCELED SEND
		fax number.
		Check that the redial on no answer
		option is enabled.
		Unplug the product telephone cord from
		the wall, plug in a telephone, and try
		making a call.
		Plug the product phone cord into a jack
		for another phone line.
		See “Resolving fax problems” on
		page 149.
FAX DOES NOT	You tried to send a fax, but the receiving	Allow the product to retry sending the
ANSWER	fax line did not answer. The product	fax.
	attempts to redial after a few minutes.	Call the recipient to ensure that fax
REDIAL
		machine is on and ready.
PENDING		Check that you are dialing the correct
		fax number.
		Check that the redial on no answer
		option is enabled.
		Unplug the product telephone cord from
		the wall, plug in a telephone, and try
		making a call.
		Plug the product phone cord into a jack
		for another phone line.
		See “Resolving fax problems” on
		page 149.

EN Resolving control panel error messages 197