HP 3200 manual Enabling stamp received faxes, To enable stamp received faxes

Enabling stamp received faxes

	The product is set up to print the sender’s identification at the top of
	each received fax. You can also choose to have your header
	information included to confirm the date and time the fax was
	received.
	If you want the product to include your header information to each
	received fax, follow the procedure below. The default setting is Off.
Note	This option only applies to received faxes that are printed by the
	product.

To enable stamp received faxes

1Press ENTER/MENU.

2Use the < or > key to select FAX SETUP and then press ENTER/ MENU.

3Use the < or > key to select FAX RECEIVE SETUP and then press

ENTER/MENU.

4Use the < or > key to select STAMP RECEIVED FAXES, and then press ENTER/MENU.

5Use the < or > key to select ON or OFF and then press ENTER/ MENU to save your selection.

96 Chapter 4 - Faxing EN