HP 3200 Redialing manually, To redial manually

6Use the numeric keys to type the date, and then press ENTER/ MENU.

- Or -

Accept the default date by pressing ENTER/MENU.

7Type the fax number, enter the speed-dial code, or press the one-touch key. (This feature does not support ad hoc groups.) Press ENTER/MENU or FAX/SEND.

The product scans the document into memory and sends it at the designated time.

Redialing manually

	If you want to send another document to the last fax number dialed,
	use the following procedure to manually redial. If you are trying to
	resend the same document you sent the first time, you will probably
	want to wait until the automatic redials have stopped or you have
	stopped them yourself. Otherwise, the recipient might get the fax
	twice: once from the manual redial attempt and once from one of the
	automatic redial attempts.
Note	To stop the current redial attempt for a fax, see “Canceling the current
	fax job” on page 64. To cancel all pending, automatic redial attempts
	for a fax, see “Canceling a fax job using Fax Job Status.” To change
	when the product redials, see “Changing how the product redials” on
	page 83.

To redial manually

1Load the document into the document feeder tray.

2 Press REDIAL/PAUSE.

3Press FAX/SEND. The product redials the last number and attempts to send the fax.

60 Chapter 4 - Faxing EN